CFD-based thermohydraulic optimization of a full-scale industrial ammonia oxidation reactor for nitric acid production via the Ostwald process

arrow icon

Next-gen energy solutions: Techno-economic optimizing fossil fuel facilities with liquid CO2 storage and collins liquefaction cycle for peak load management and sustainable efficiency

arrow icon

Proposing wavy-shaped legs for performance improvement of thermoelectric generators: energy, exergy, environmental, and mechanical analysis using a CFD-trained machine learning method

arrow icon

Full optimal geometric exploration of M-cycle indirect evaporative dewpoint cooler using a substantial experiment-oriented AI algorithm

arrow icon

Enhanced Peltier refrigerator using an innovative hot-side heat-rejection mechanism; Experimental study under both transient and steady-state conditions

arrow icon

Power generation enhancement and CO2 emission reduction of a biomass powered gas turbine via hydrogen injection and wind energy incorporation

arrow icon

Economic assessing and optimizing according to the environmental factor of a reforming cycle for producing hydrogen, cooling, and distilled water

arrow icon

Performance boost of a commercial air-to-air plate heat recovery unit by mesh-net insert; thermal-frictional, economic, and effectiveness-NTU analysis

arrow icon

Thermal-frictional behavior of new special shape twisted tape and helical coiled wire turbulators in engine heat exchangers system

arrow icon

Proposing and thermo-economic optimization of an annular-thermoelectric gas heat recovery unit with a novel hybrid fin-pin vane and porous insert

arrow icon

Towards a promising systematic approach to the synthesis of CZTS solar cells

arrow icon

Recent progress in performance improvement strategies for quantum dot sensitization methods: Challenges, achievements, and future prospects

arrow icon

Simulation of various cross-section shapes of spring-wire as a turbulator for spiral-pipe

arrow icon

Geothermal assisted Rankine cycle for performance enhancement of a biomass-driven power plant; thermoeconomic and environmental impact assessment

arrow icon

A comprehensive geometric investigation of non-circular cross section spring-wire turbulator through the spiral-tube based heat exchangers

arrow icon

Computational fluid dynamics simulation of a designed envelop contenting phase change material and imposed solar heat flux and ambient air

arrow icon

Thermodynamic investigation of a single flash geothermal power plant powered by carbon dioxide transcritical recovery cycle

arrow icon

Economic cost analysis of air-cooling process using different numbers of Peltier modules; Experimental case study

arrow icon

Effect of Twisted Fins on the Melting performance of PCM in a Latent Heat Thermal Energy Storage System in Vertical and Horizontal Orientations: Energy and Exergy Analysis

arrow icon

Simulation of natural convection of n-Hexadecane paraffin inside a porous chamber

arrow icon

Mechanism of chemical bath deposition of CdS thin films: Influence of sulphur precursor concentration on microstructural and optoelectronic characterizations

arrow icon

The effects of tube Dimples-Protrusions on the thermo-fluidic properties of turbulent forced-convection

arrow icon

Drivers of AI Tool Adoption in Multilingual English Classrooms: A TAM-Based Structural Equation Model

arrow icon

Between Documentation and Pedagogy: ESL/EFL Teacher Burnout and Perceptions of AI's Potential for Workload Relief

arrow icon

Exploring the Role of ChatGPT in English Teaching and Learning: Educators’ and Language Learners’ Perspectives

arrow icon

Beyond Language: Exploring the Hidden Curriculum's Contribution to the Development of English Language Learners

arrow icon

Exploring the Attitude of ELI Students and Their Parents toward Learning English Language after Covid-19 Pandemic and Its Relationship with Their Academic Achievement

arrow icon

Examining the Impact of Artificial Intelligence (AI) Tools for Saudi Arabian English as a Second Language (ESL) Students

arrow icon

Modeling energy and stress concentration in diesel engines with flexible crankshaft

arrow icon

Improving wind turbine performance in dual-star induction generator systems with fractional-order fuzzy PID control

arrow icon

Deep neural networks model for accurate photovoltaic parameter estimation under variable weather conditions

arrow icon

Blending traditional and digital methods: enhancing EFL speaking skills beyond LMS platforms

arrow icon

Revisiting Reading Approaches Practiced in EFL Classrooms: Insights into Adult English Learners' Perspectives and Preferences

arrow icon

A brief review on extraction and characterization of nanocellulose from date palm biomass

arrow icon

Multifunctional behaviour of PLA biomacromolecules by GNP/TiO2 hybrid nanofiller integration: Amplifying strength, solvent sorption resistance and antimicrobial properties

arrow icon

Influence of Multi‐Walled Carbon Nanotubes and Nano‐Tungsten Carbide Hybrid Fillers in Enhancing Wettability, Fracture Toughness, and Sorption Characteristics of Polypropylene Nanocomposites

arrow icon

Multifunctional Performance Enhancement of Polypropylene Nanocomposites via Dual Filler Hybridization: Mechanical, Viscoelastic, Creep, Aging, and Repairability Analysis

arrow icon

Deciphering the combined effect of 0-D and 1-D hybrid nanofillers on the microstructure development, dynamic mechanical properties, and flammability of polypropylene.

arrow icon

Effect of SiO2 nanoparticles on the melt-crystallization kinetics and mechanical behavior of polypropylene

arrow icon

Public Safety in Smart Cities: An Experimental Study to Monitor and Record Vehicles’ Movements and Record Vehicles’ Movements

arrow icon

Digital Twin-Driven Intrusion Detection for Industrial SCADA: A Cyber-Physical Case Study

arrow icon

An advanced sensorless control strategy using PS-EKF-based Integral Backstepping Controller for PMSM: Experimental validation using dSPACE DS1104

arrow icon

Supporting the reactivity of nuclear power plants using an optimized FOPID controller with arithmetic algorithm: Toward an environmentally sustainable energy system

arrow icon

A Comparative Analysis of Recent MPPT Algorithms (P&O\INC\FLC) for PV Systems

arrow icon

The Utilization of a TSR-MPPT-Based Backstepping Controller and Speed Estimator Across Varying Intensities of Wind Speed Turbulence

arrow icon

Model reference adaptive system and pseudo-sliding mode control with exponential reaching law for sensorless-speed control of PMSM

arrow icon

Stochastic energy management of DC photovoltaic microgrids using Markov decision process

arrow icon

Processor-in-the-loop validation of a super-twisting algorithm for enhanced direct power control of a variable-speed DFIG using dSPACE 1104 controller board

arrow icon

Optimizing wind energy conversion system efficiency using advanced modified super-twisting direct power control: Real-time implementation on dSPACE 1104 board

arrow icon

Priority measures for mitigating transport-related carbon emissions in Saudi Arabia: A multi-criteria analysis

arrow icon

Revealing land use dynamics in armed-conflict hotspots in North-East Nigeria using earth observation data

arrow icon

Multifunctional Poly(2-ethyl-2-oxazoline)/Lithium-Silver Oxide Nanocomposites: Insights into Structural, Mechanical, Thermal, Electrical, and Antibacterial Properties

arrow icon

Performance characteristics of optimized bi-fluid photovoltaic-thermal solar system: A comparative study of innovative cooling system made of different materials

arrow icon

Experimental augmentation of the conical solar distiller performance via an innovative combination of enhancement techniques

arrow icon

Performance improvement of single slope solar distiller by using a novel corrugated–concave absorber: An experimental comparative study with energy, exergy, enviro–economic (4E), and sustainability assessments

arrow icon

4E assessment and optimization of conical solar still performance: A study on innovative dual-tray basins combined with truncated conical external reflectors

arrow icon

Innovative Approaches to Foreign Language Instruction in the Post-Pandemic Era: Unlocking the Potential of Smartphones and Tablets in Teaching English as a Foreign Language

arrow icon

The Impact of Teacher Questioning Strategies on EFL Learners' Second Turn of the IRF Sequence: A Case Study of Two Saudi Arabian Classrooms

arrow icon

Does Relationship of Knowledge Management Practices with Eco-innovation Matter? A Mediating, Moderating Analysis Evidence from ICT Sector

arrow icon

Development and testing of a portable on-desk-size Maisotsenko indirect evaporative cooler for Central Saudi Arabia’s climate

arrow icon

CFD-based thermohydraulic optimization of a full-scale industrial ammonia oxidation reactor for nitric acid production via the Ostwald process

arrow icon